Custom steel Metal Stamping Parts

Table of Contents

Metal Stamping Parts

Basic Info of above Custom steel Metal Stamping Parts

Model NO.: N/M to be advised
Processing Type: Shaping Metal
Mould: Simple Single Process Dies
Fine Blanking: Open
Industry: Metal Stamping Parts
Customized: Customized
Surface Roughness: Ra 3.2
Warranty: 1 Year
Tolerance: DIN 2768-M
Customer: Ti Automotive and so on
Trademark: SINSTER
Origin: Ningbo China

Type: Cold Stamping
Material: Carbon Steel
Surface Processing: Electroplating
Process: Forming Process
Tolerances: 0.1mm
Technics: Stamping
Usage: Auto Parts
OEM: Yes
Certification: ISO9001:2008
Product Type: Custom Electrical/Auto Sheet Metal Stamping Parts
Specification: ISO9001: 2008

Material: ST 37-2 (or on your demand)
Technics: Stamping
Surface finish: Polishing, zinc plated (12μ M)
Surface roughness: Ra 3.2
Minimum Tolerance: +/-0.02mm
Inspection: Slide caliper, microcaliper, Spectroanalysis Instrument, 100%
Certification: ISO9001: 2008
Package: Rust prevention, plastic bag, carton box, wood pallet
OEM Service: We can produce it according to your drawings or samples.

Custom steel Metal Stamping Parts

1. We always stand behind what we sell, with warranty and excellent customer service. This is the biggest difference between our company and other Chinese suppliers whose parts and service are impossible to get. We warrantes the quality of our products, we will replace the non-correct products for free including courier fee during warranty time of one year.

2. Our Limited Warranty
We warrants our products against manufacturer’s defects in materials and workmanship. This warranty does not apply: (a) to damage caused by accident, abuse, misuse, misapplication, or non-We products; (b) to a product or part that has been modified without the written permission of us.

3. In the period of warranty, you should pay for sending faulty parts back to us, and we will pay for sending replacements to you. When complaining about a visual defect, you needn’t send us the faulty parts if you could provide us with enough photos as requested. In case of no photos or invisible defect, you have to send back the faulty parts to us. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes our’s property.

4. Customer must present evidence that the claimed products were bought with us and the broken product is due to manufacturer’s defect. All warranty claims must be authorized and accepted by us in advance.

More services we offer
Besides of metal stamping services,we also offer OEM / ODM service of deep drawing services,Sheet metal fabrication,CNC machining parts,Wire forming parts.Our advanced equipments,professional engineers,high quality system,enable us to provide high quality with low production cost.Based on our strength, passion and capacity, we devote to supply one-stop service to customers.